How To Secure A Full Length Floor Mirror To Any Wall

There’s something about seeing your entire reflection in the mirror. You might pass the hall area or enter the bathroom. The opportunity to check your appearance is crucial if you are heading outside. So, what’s the perfect product to achieve this goal?

Many homeowners decided to go with a full length mirror. You might’ve also heard about those as the “leaner” units. While they are convenient, there’s still the question of securing them to a wall. This guide explains or details this process. These are the details of anchoring the unit to any desired position in your house!

Steps to Securing a Full-Length Floor Mirror to a Wall

Attaching Floor Mirror to wall

Securing the unit means that it won’t move out of its place. That way, you minimize accident risk. Not only do they say it’s bad luck, but breaking these accessories can hurt someone. That’s why you should perform the steps below and secure the product. The process is similar for all types, including a floor mirror with LED lights.

A Quick List of Supplies

Before you start, make sure to secure everything for the project. Apart from the actual mirror, you’ll need several other things. Those include the following:

  • Pencil
  • Screwdriver
  • Screws
  • Anchor cable
  • Measuring tape
  • Wall anchor

The entire project shouldn’t take more than several minutes. Its entire point is to secure the mirror to the wall. The steps below describe one way to do it. You can get creative and use furniture straps or some other methods. The important thing is the product stays secure. That way, it minimizes the risk of falling onto someone or causing damage.

Step 1: Identifying the Right Position

It all starts with picking the spot for placing the mirror. Helping hands could be of assistance here. The assistant can hold the product, so it doesn’t fall down. You move away at the desired distance to see if you can see the entire reflection.

Once you have a perfect position, grab a pencil. Use it to position the place where the mirror’s upper central side touches the wall surface.

It's important to install the mirror flush against the wall to ensure an accurate reflection.

Step 2: Installing a Wall Anchor

Ask the assistant to help you move the mirror away from that position. It’s vital to see the noted point well. From that point, use a measuring tape to mark five centimetres below that location.

Next, position the wall anchor to that new mark. Grab the cable and apply a screw to connect it to the anchor. This is only applicable to a single side.

Step 3: Finishing Touches

You’ll need assistance for this step, too. While someone is holding the accessory, measure its width. Find the middle point on its back and mark it with a pencil. That’s where you’ll screw the mirror anchor.

Now, return the product to the designated location. The only remaining thing to do is to connect the cable’s opposite end to the last screw you mounted.

Don’t hesitate to check if the mirror seems secure. If you did everything right, you’d notice it virtually doesn’t have wiggle room. You can finish the project and feel proud you contributed to the household members’ safety.

How Do I Keep My Free Standing Mirror from Sliding?

Wall attachment

Now that you finished the installation, you want the product to stay in its place. However, you are a bit afraid of potential sliding. Use these crucial tips to ensure the accessory remains in its position!

  • Avoid High-Traffic Locations

Before the setup, find a location with fairly low traffic. That means not placing the mirror where those passing by have a frequent chance of kicking it. It will minimize the risk of accidents. A corner of your hall or bathroom can be a smart choice. Alternatively, go with a wall that you don’t get close to often.

  • A Grip Under the Product

An expert trick is to add a grip surface below the accessory. If you paid large money for an oversized antique floor mirror, it minimizes damage risk. Apart from protecting the product, it also keeps the material under it scratch-free.

  • Check on It Occasionally

Try to assess the product from the side. Do you see the mirror tilted unusually? If yes, try to bring it to a more stable position. Discovering sliding on time ensures you can eliminate a potential fall risk.


Final Thoughts

It will take some effort to secure your full length floor mirror to a wall. However, it will promote its stability and boost longevity. Thanks to that, you’ll ensure you made a good long-term investment.

Be sure to also read our Full Length Mirror buying guide for further tips and tricks!